SCAFFOLDING SUPERINTENDENT.
Must be NVQ
qualified as a minimum with scaffold inspector
certificate.
Minimum 10 years
experience must be able to carry out scaffolding
design and calculations,
for the erection of scaffolds as are required to
assist the overhaul of vessels, columns,
heat exchangers, spading, opening, closing, as
well as small project activities, etc
Potential
candidates must be able to participate in
Telephone Interviews by Client in the next few
weeks.
Salaries will be
commensurate with their qualifications and
experience.
SCAFFOLDER SUPERVISORS
Requirements:
a. Scaffolding supervisors shall have not less
than ten (10) years relevant experience in the
scaffolding industry. He shall hold an advanced C.I.T.B or E.I.T.B. Certificate of training.
b. He shall be responsible to the CONTRACT
MANAGER for supervision, co-ordination, and
carrying out of scaffolding in connection with
the WORK and shall be responsible for the
workmanship, productivity, conduct and safety of
the personnel. The Scaffolding supervisor shall
be responsible for all aspects of design,
erection and in-service maintenance and
inspection of the scaffolding.
SCAFFOLDER LEVEL 1
Requirements:
a. Have the full range of skills and
certificates applicable to their trade for the
Oil and Gas Industry, being skilled in the
erection and inspection of such scaffolds as are
required to assist the overhaul of vessels,
columns, heat exchangers, spading, opening,
closing, as well as small project activities,
etc
b. Have a minimum of four (4) years suitable
practical experience in oil refinery, gas, power
or petro-chemical plant;
c. Have a working knowledge of the English
language
SCAFFOLDER LEVEL 2
Requirements:
a. Have the full range of skills and
certificates applicable to their trade for the
Oil and Gas Industry, being skilled in the
erection and inspection of such scaffolds as are
required to assist the overhaul of vessels,
columns, heat exchangers, spading, opening,
closing, as well as small project activities,
etc. He shall hold an advanced C.I.T.B or
E.I.T.B.
b. Be certified to erect suspended and load
bearing scaffolds, as well as supervising
helpers
c.Have a minimum of four (8) years suitable
practical experience in oil refinery, gas, power
or petro-chemical plant;
ELECTRIC FIELD
ENGINEER
Requirements:
The Electrical Field Engineer shall posses a BSc
(or equivalent) in Electrical Engineering and
shall have eight (8) to ten (10) years
experience in design/construction/commissioning/
maintenance of H.V and L.V distribution systems
including protection systems and explosion proof
equipment. He must be able to speak, read and
write good English (College level) .
ELECTRIC ENGINEER
Requirements:
1. The incumbent shall
have a minimum of 10 years professional
experience in oil & gas facilities Electrical
and Instruments design, construction and
maintenance, and hold an appropriate technical
qualification e.g. Degree, HND, or equivalent
experience commensurate with the specific
requirements of the WORK. He shall have
knowledge of modern Electrical and instrument
systems including DCS, PLC, F & G detection and
metering systems.
2. The Electrical engineer
shall be responsible for the following: -
- Providing specialist support
in the areas of process measurement and control
- Supervision, planning and
execution of electrical and instrument design
activities associated with projects.
- Providing electrical &
instrumentation engineering standards, drawings
and procedures.
- Development of detailed
contents of MC and PC packs, including tracking
of works and completion thereof.
- Supervision of site
installation and quality control of works.
ELECTRIC INSPECTOR
1.
Shall hold HNC in electrical/electronic
engineering
or
City & Guilds electrical Technician
Certificate.
2. Shall
have minimum 10 years of experience in the Oil
and Gas industry in the area of electrical
construction, commissioning and maintenance of
certified electrical with 5 years as an
electrical inspector.
ELECTRIC TECHNICIANS.
Each technicians shall have passed the C and G
803 parts I and II or equivalent and shall have
five (5) to seven (7) years experience in wiring
of H.V/L.V control systems, installation of
protection relays and CT‟s
and explosion proof equipment. He must at least
speak, read and write reasonably good English
(upper secondary school level).
SKILLED ELECTRICIANS
.
Skilled Electricians shall have completed trade
apprenticeship or trade school training to C and
G 823 or equivalent level. They must be skilled
and experienced in the use of all electricians‟ hand
tools and in the use of measuring and testing
equipment. They must have at least 5 years on
the job experience of which two (2) years shall
preferably in the oil and gas industry. . He
must at least speak, read and write reasonably
good English (lower secondary school level)
MECHANICAL ENGINEERS
a. Shall hold an appropriate
technical qualification e.g. Degree, HND, or
equivalent.
b. Shall have an Engineering background
with at least 10 years experience in
Project Management and onshore construction in
the Oil and Gas Sector with emphasis on Piping.
c. Shall be responsible for the
fabrication operation and execution of all
aspects of the Contract, including but not
limited to: Engineering and construction
aspects; Installation; performance, including
inter alia workmanship, productivity; HSE
implementation; WORK planning and execution;
maintenance of drawings and records; all quality
assurance and control implementation and
mechanical completion.
MECHANICAL FITTER
Requirements:
(a) have the full range of skills applicable to
their trade in the Oil and Gas Industry
including, but not limited to, being skilled in
the repair and maintenance of refinery process
and power plant, pumps, compressors, steam
turbines, fans, hydraulic equipment and system
etc., in the overhaul of valves (including
safety relief and control valves) and of other
mechanical equipment e.g. exchangers, columns,
vessels and tanks, and in the alignment of
running equipment;
(b) have a minimum of five (5) years suitable
practical experience in oil refinery, gas, power
or petro-chemical plant;
(c) have a working knowledge of the English
language
MACHINISTS.
Requirements :
(a) be able to work from drawings to produce
parts, or make repairs to stationary and
rotating equipment to a high level of accuracy
and quality;
(b) be able to set up and operate any machine
tool, including lathes, boring, milling,
lapping, grinding, shaping and balancing
machines;
(c) have a minimum of ten (10) years experience
as a Machinist;
(d) have a sound knowledge and a familiarity
with engineering drawings and sketches, as well
as being fully conversant in English.
CIVIL FIELD ENGINEERS
a.
Shall hold an appropriate technical
qualification e.g. Degree, HND, or equivalent.
b.
Shall have at least 10 years practical site
experience as a Civil Engineer in the oil and
gas industry.
c.
Experience shall include detailed planning for
construction activities; preparation of
construction packages detailing work scope and
installation procedures; preparation of site
sketches/drawings for issue to construction
crews to aid design drawings; supervision of
construction crews/teams in the execution of
work; pre commissioning activities and
preparation of job activities.
PLANNING ENGINEERS / PLANNER
a. Shall
hold an appropriate Technical qualification and
have a minimum of five years
practical experience in planning of minor and/or
major onshore/offshore projects in the Oil and
Gas industry.
b. Shall have knowledge of Planning
software e.g. Primavera, Project Scheduler and
P3E including Work Management System; Critical
Path Analysis planning techniques and the
preparation of project schedule;
Methods of effective presentation of planning
and forecast data and information; Trend
analysis and forecasting techniques ; Safety
aspects of design in relation to the project
cycle ; Quality Assurance and Control
requirements of the design cycle, Quality
Assurance and Control requirements of the design
cycle,Contribute
significantly to the preparation of level 3
workpacks or job cards in compliance with
the contract requirements, Assess and determine
actual physical progress, Develop recovery plan
as and when required.
The salaries will be commensurate with
qualifications and experience.
HSE OFFICER
a. Shall
have experience in the oil and gas industry.
b. Shall
have attended and passed a recognized course in
the management of HSE in the contracting sphere
and shall have a proven track record of at least
5 years as a HSE Officer,
fluent in English and fully conversant with the
COMPANY HSE Standards and Specifications .
Salaries will be commensurate with their
qualifications and experience.
QA/QC COORDINATOR / INSPECTOR
He/she shall be able to demonstrate to have
sufficient knowledge and experience of petro-chemical
projects. Has a minimum of 10 years experience
in quality assurance and control role including
supervision of QA/QC activities, with a solid
Engineering background and CSWIP 3.2 or
equivalent qualification. Shall also hold a
recognised approved qualification in Quality,
such as ISO 9000 lead assessor and certified to
interpret RT film. Will have detailed knowledge
of NDT techniques and welding and is a certified
third party lead auditor.
A co-ordinator(s) will likely hold a HND or
equivalent qualifications with minimum of Ten
(10) years experience.Responsibilities
will include (but not limited to) :
-
development and implementation of the quality
plan,demonstration
of quality control of all tools that can
affect quality, ref. Torque wrenches, Pressure
Gauges, Callipers, etc.,
to be able to identify, develop and implement
corrective actions,to approve and comment on
welding procedures, and to generate welding
instructors, to ensure smooth safe delivery of
the Quality Plan.
INSTRUMENTS
FIELD
ENGINEER
The Instrumentation field engineer shall possess
an HND or equivalent and shall have eight (8) to
ten (10) years experience in new construction
and commissioning of Instrumentation works. He
must be able to speak, read and write good
English (College level)
INSTRUMENTS INSPECTOR
a.
Shall hold HND/HNC in measurement and control
or
equivalent qualifications.
b. Shall have minimum 10 years of experience
in the Oil and Gas industry in the area of
construction,
commissioning and maintenance of process
instruments, with 5 years as an Instrument
Inspector.
QUANTITY SURVEYOR
a. Shall hold an appropriate technical
qualification e.g HND or equivalent.
b. Shall have a minimum of three (3) years
experience as a Quantity Surveyor
with Oil and Gas
experience in civil and mechanical.
c. Experience shall include:
Quantity Surveying services during contract
evaluation and administration; preparation of
bill of quantity and cost estimate;
Interpretation of contractual provisions within
the contract; resolution of disputes assistance.
Salaries will be commensurate with
qualifications and experience.
SENIOR SUPERVISORS
The Senior Supervisor shall possess
approximately ten (10) years experience with a
minimum of five (5) years satisfactory
supervisory experience and received an
engineering apprenticeship or training in
Mechanical Engineering.
Responsibilities shall include:
a. Be skilled in the fabrication and erection
of pipework, the general maintenance of process
and power plant. The setting up and levelling of
equipment and the aligning of rotating
equipment;
b.
Be capable of interpreting engineering
drawings and have knowledge of industrial
safety;
c.
Be fluent in the English language (both
spoken and written);
d. Be capable of supervising the artisans and
performing any administrative work. Such
activities may include but will not be limited
to obtaining and renewing work permits,(e.g.
Clearance Certificates, Fire Permits etc.),
submitting daily time sheets, input required
data for the COMPANY computerized engineering
administration systems.
SUPERVISORS
Requirements:
(a) be skilled in the fabrication and erection
of pipework, the general maintenance of process
and power plant. The setting up and levelling of
equipment and the aligning of rotating
equipment;
(b) be capable of interpreting engineering
drawings and have knowledge of industrial
safety;
(c) be fluent in the English language (both
spoken and written);
(d) be capable of supervising the artisans and
performing any administrative work. Such
activities may include but will not be limited
to obtaining and renewing work
permits,(e.g. Clearance Certificates, Fire
Permits etc.), submitting daily time sheets,
input required data for the COMPANY computerised
engineering administration systems.
WELDING
INSPECTOR
Experience
10 years in Oil and Gas or related Industry with
5 years of which as Welding Inspector.
Requirements:
CSWIP - Senior Inspector 3.2 ,AWS - Certified
Welding Inspector and CSWIP or PCN LII or ASNT
LII in Radiographic Interpretation (Ferritic
Steel) or
CWB LII - Canadian Welding Bureau (AWS
Equivalent ) and CSWIP or PCN LII or ASNT LII in
Radiographic Interpretation (Ferric Steel or
Equivalent),Knowledge
in Inspection Methods/Techniques, QA/QC
Principles and Standards,
Knowledge in Quality Management System ISO 9000.
PVC
WELDER
a. Qualified and tested according to the Company
Standards Specification 19.01, 61.6 and 6 GR.
b. Experienced in the use of tungsten arc,
manual arc, gas and PVC welding and cutting
techniques and other applications to ferrous and
non-ferrous metal.
BLAST / PAINT or COATING INSPECTOR
The Inspector shall be certified with NACE level
2 (National Association of Corrosion Engineers)
or ERS Senior Paint Inspector Level II or
equivalent as a minimum and shall have at least
five (5) years experience in painting/coating
inspection and in general five (5) years
experience in coating application work which
includes knowledge of surface preparations,
paintings, protective coatings and wrapping.
The inspector is responsible for quality control
and as such he shall have no direct
responsibilities for production although he will
work closely with the production team.
The Coating inspector shall be responsible for
all protective coating HSE aspects. He will be
allowed to act as Safety Officer only for the
protective coating application team.He shall
co-ordinate with the COMPANY's Health Safety and
Environment (HSE) Division on all protective
coating safety matters.
He shall be able to communicate and write
fluently in English.
COATING SUPERVISORS
The Coating Application Supervisor shall be
certified with NACE level 1 or equivalent level
and have at least two (2) years experience as
Coating Application Supervisor. Further he shall
have in general five (5) years experience in
protective coating application work. He shall be
well versed in the use of quality control
instruments and spray application techniques of
various types of paints. He shall be fully
familiar with all surface preparation methods
and the operation and maintenance of all related
equipment used for this contract.
SPRAY COATING
All spray coating applicators shall have had at
least one (1) year suitable spray coating
application experience and have a general work
experience of two (2) years in protective
coating application work. They shall have a
thorough knowledge of the use of pneumatic
tools, the mixing of paints and industrial
application methods with all kinds of paint
spraying equipment, such as airless and
conventional spray units.
They shall be well experienced in spray
painting. They shall be well versed in
dismantling and cleaning the spray painting
equipment and accessories
COATING
All Coating Applicators shall have at least one
(1) year suitable coating application experience
in general two (2) year experience in coating
application work. They shall have a thorough
knowledge of and training in the use of
pneumatic tools, at the mixing of coating
application methods.
PAINTERS
Fully experienced in painting preparation and
protection of steel surfaces techniques using
hand and mechanical EQUIPMENT by either brush,
or rollers and painting to the respective
standard operations contained in COMPANY'S
Painting/Coating Application guide and
Specifications ES-48.00 and Module 32, and be
familiar with the safety requirements of
painting.
BLASTERS
(a) Fully experienced in grit blasting to a
visual standard of SA 2 1/2 near white metal
Swedish Standard SIS, handle and operate power
tool cleaning, hand tool cleaning and solvent
cleaning. Be familiar with the safety
requirement of grit blasting.
(b)
The blasters
shall have at least 3 years suitable experience
in shot blasting work using all types of
abrasives including GMA garnet and glass beads.
Each blaster shall be able to operate/connect
shot-blasting equipment and air compressors.
(c)
The blasters
shall be able to shot blast any metal surface to
any Swedish Pictorial Standard from SA 1 to SA
3.
(d)
The blasters
shall be to work in confined spaces, at heights
or from suspended work platforms.
(e)
In general the
blasters shall have two (2) years of work
experience in protective coating application
work.
BLASTER
AND PAINTER SPARY;
1. Blaster B$ 23.00
per day (with 8 hours working time) from 0800
till 1700 hours, work beyond 8 hours normal (or
beyond 1700) will be consider as overtime @ B$
4.00 per hour
2. Spray Painter B$
21.00 per day (with 8 hours working time) from
0800 till 1700 hours, work beyond 8 hours normal
(or beyond 1700) will be consider as overtime @
B$ 3.50 per hour
3. Blaster cum Spray
Painter B$ 30.00 per day (with 8 hours working
time) from 0800 till 1700 hours, work beyond 8
hours normal (or beyond 1700) will be consider
as overtime @ B$ 5.00 per hour
4. Wages
will start count upon passing the BLNG plant HSE
Induction course, i.e. start work in BLNG plant.
And if unfortunately fail the BLNG HSE Induction
course, we SAHID will try our best to guard
pass the HSE Induction with the maximum of 2
times re-sitting the examination.
5. The
above mentioned working hours is only applicable
to the BLNG plant working time.
Workable day
: Monday to Saturday. Sunday & Public Holiday
shall be consider as Overtime.
Public Holiday shall follow
Brunei Government cascaded
STATIONARY EQUIPMENT TECHNICIAN
Requirements :
a. Be
skilled on the opening up, closing, removal and
installation of stationary equipment such as
vessel, columns, heat exchangers, filters,
non-return valve, valves, sight glasses,
safety/relief valves, control valves including
repacking and lapping of various valves;
b.
Be familiar with spading and de-spading of
pipeline system and have basic knowledge of
hydraulic system;
c. Be
familiar with piping work such as flange sizes,
stud-bolts, pressure setting and gasket
materials;
d.
Be capable of using tools such as torque
wrenches and hydraulic bolt tensioning
equipment;
e.
Be fluent in spoken and written English.
f. Have
industrial working experience in the process
industry on similar work for at least four
years;
g Have
BTEC or City and Guild Certificate in Mechanical
Engineering (desirable but not essential).
h.
A minimum of 3 personnel are required to be
certified in the use of Breathing Apparatus (BA)
CONTROL VALVE TECHNICIANS
Requirements :
a. Have experience - at least ten (10) years, in
the overhaul, setting and testing of all types
of control valves, including but not limited to
FISHER, MASONEILAN AND BETTIS control valves and
actuators. He must have relevant experience and
ability in the testing procedures, stroke
adjustment and repair;
b. Have BTEC or City and Guild Certificate in
Mechanical Engineering (desirable but not
c. Have industrial work experience on relevant
types of control valves in overhaul and testing
for a minimum of 4 years;
d. Be fluent in spoken and written English;
e. Preferably be capable of working with spare
parts and maintenance history system;
f. Be capable of motivating and directing
small teams of 2-4 fitter mechanics;
SAFETY RELIEF VALVE
TECHNICIANS.
Requirements :
a. Be experienced - at least ten (10) years, in
the overhaul, setting and testing of all types
of Safety Relief Valves, including but not
limited to CROSBY, FUKUI, DRESSER, ANDERSON &
GREENWOOD. He must have relevant experience and
ability in repair and testing of Safety Relief
Valves. He should be capable of working with
inspectors and maintaining simple repair records
systems. He should understand the principle of
operation of Safety Relief Valves;
b. Have BTEC or City and Guild Certificate in
Mechanical Engineering (desirable but not
essential);
c. Have industrial work experience on relevant
types of safety relief valves in overhaul and
testing for a minimum of 4 years;
d. Be fluent in spoken and written English;
e. Preferably be capable of handling records
systems;
f. Be capable of motivating and directing small
teams of 2-4 fitter mechanics
ROTATING EQUIPMENTS TECHNICIANS.
Requirements :
a.Have obtained National Certificate (BTEC) or
equivalent City and Guilds Certificate in
Mechanical Engineering Practices;
b. Be capable of overhauling rotating equipment
such as centrifugal and reciprocating pumps,
steam turbines, gear boxes and reciprocating
compressors (including their piping system and
structural support);
c. Be able to interpret drawings and manuals and
have a good understanding of the functioning of
each part of the equipment.
d. Be able to diagnose and correct intricate
problems in turbine/compressor lube-, control-
and sealoil systems and other hydraulic systems.
e. Be capable of selecting and using the correct
tools, alignment equipment and materials;
f. Have good knowledge of industrial safety
procedures;
g. Have a minimum of six (6) years practical
experience in overhauling rotating equipment;
h. Be able to communicate in spoken and written
English.
RIGGERS
Requirements :
a. Have the full range of skills applicable to
their trade in the Oil and Gas Industry
including, but not limited to being skilled in
the sizing and fixing of slings, chain blocks
etc., giving clear control instructions to crane
operators and in the erection of steelwork
b. Have a minimum of four (4) years suitable
practical experience in oil refinery, gas, power
or petro-chemical plant
c. Have a working knowledge of the applicable
standards and the use and handling of :
-
wire ropes/slings to BS1290, BS3317 and BS3481 ,
pulley blocks to BS3243
,
shackles to BS3032, chain hoists to BS4898.
INSULATION
SUPERVISORS.
Requirements :
a. The Insulation Supervisor shall have received
education up to Form 5 level and shall be able
to speak, read and write in the English
language. He shall have a proven record as a
supervisor in Thermal and Cryogenic Insulation,
the application of vapour barriers and Glass
fibre Reinforced Epoxy, the mixing of chemicals
for the formulation of Polyurethane Foam and the
maintenance/installation of refractory bricks or
mortar work and sheet metal work for at least
Five (5) years. He shall be able to demonstrate
his competence by passing a competence or trade
test if so required by the COMPANY.
b. He should have knowledge of the latest
revision of the CINI guideline and know how to
apply the guideline for hot and cold insulation.
c. He shall be able to take measurements and be
familiar with sheet metal equipment and make
sketches for the fabrication of sheet metal work
as well as being capable of installing the
finished work
d. He must be capable of exercising firm control
over his subordinates and must meet the
stringent standards (QA/QC) required for
insulation work.
e. He shall be well experienced in the operation
and general maintenance of mechanical agitators
and foaming machines, and in quality control
procedures.
INSULATOR
/ FABRICATORS.
Requirements :
a. The Insulators/Fabricators shall have
received education up to Form 3 level and be
able to speak, read and write in the
English/Malay languages.
b. They shall have received a formal training or
apprenticeship in their craft and shall be
skilled in Sheet Metal Fabrication, the
installation and repair of Thermal and Cryogenic
Insulation, the application of vapour barriers
and Glass fibre Reinforced Epoxy, the mixing of
chemicals for the formulation of Polyurethane
Foam and the maintenance/installation of
refractory bricks or mortar work.
c. They shall be skilled in the
installation/repair of sheet metal work. They
shall be thoroughly familiar with all other work
related to Thermal and Cryogenic Insulation and
refractory/bricks repair work.
d. They shall have received a formal training or
apprenticeship in the sheet metal work craft,
from a recognised Trade School. They shall have
at least five (5) years experience in the
formation of various types of Aluminium and
sheet metal or S.S. boxes, sleeves, elbows, "T"
junctions cladding for pipe line and equipment.
They shall be able to take accurate site
measurements for the fabrication of various
types of forms and/or sleeves.
DIESEL
ENGINE OPERATORS
Requirements :
a. Have BTEC or City & Guild Certificate in
Mechanical Engineering (desirable but not
essential).
b. Be able to service and overhaul diesel
engines such as compressors, pumps, generators,
etc.
c. Be capable of using the correct tools and
equipment.
d. Have good knowledge of industrial safety
procedures.
e. Have a minimum of four (4) years practical
experience.
f. Be able to communicate in spoken and
written English.
DATABASE ENGINEER
Over five years
of Completion system experience
- Ability to Administer and monitor
Completion system
- Data integrity assurance and security
- Extensive work with completion dossiers
and submission
