121. SENIOR BRICKLAYER
Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 3355 / month
The desired candidate must have a minimum of 5 years
experience in the following:
1.
Linings EAF, Linings
Ladle, Linings Tundish, Linings DR furnace
2.
Applies
fettling/repairing for EAF
3.
Leads operating team
4.
Uses lance and cutting
torch
5.
Knowledge about
Meltshop safety
6.
Repairs ladle flow
control system, Repairs Vesuvius ladle flow control
system
Diploma/degree in science is a must.
Scheduled Deployment Date: August-September 2010
122. SENIOR CASTING OPERATOR
Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 3355 / month
The desired candidate must have a minimum of 5 years
experience in the following:
1.
Working on a
Continuous Casting Plant
2.
Production of
Billets/Blooms or Beam Blanks
3.
Experience of Casting
and Discharge activities
4.
Supervision of other
operators
5.
Health & Safety and
Environmental responsibilities
6.
Knowledge of
Engineering of Casting machine
Diploma/degree in science is a must.
Scheduled Deployment Date: April-June 2010
123. SENIOR CRANE OPERATOR
Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 3355 / month
The desired candidate must have a minimum of 5 years
experience in the following:
1.
Works in Steel Plant
2.
Drive Over-head crane
capacity more than 70 tons, Drive Over-head crane in
EAF
3.
Drive Over-head crane
in CCM, Drive Over-head Crane in RM
4.
Leads Crane operators
team
5.
Applies crane repair
activities
6.
Knowledge about
Meltshop safety, Knowledge about Manning Plan
Diploma/degree in science is a must.
Scheduled Deployment Date: August 2010
124. SENIOR LADLE REPAIRMAN
Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 3355 / month
The desired candidate must have a minimum of 5 years
experience in the following:
1.
Works in Steel Making
Plant
2.
Installs ladle porous
plug
3.
Linings of ladle
refractory
4.
Repairs ladle flow
control system
5.
Repairs Vesuvius ladle
flow control system
6.
Knowledge about
Meltshop safety
7.
Supervision of other
operators
8.
Experience of EAF/LF/CCM
plant
Diploma/degree in science is a must.
Scheduled Deployment Date: August-September 2010
125. SENIOR MELTER
Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 3355 / month
The desired candidate must have a minimum of 5 years
experience in the following:
1.
Operates with
EAF-LF-CCM route, Operates UHP furnace with minimum
80 ton capacity
2.
Operates EAF with DRI/Scrap
3.
Produces low/high
carbon steel
4.
Applies fetling/repairing
for EAF
5.
Leads operating team
6.
Knowledge about
Meltshop safety
7.
Uses cutting torch and
welding
8.
Operates oxygen -
carbon module
Diploma/degree in science is a must.
Scheduled Deployment Date: April-June 2010
126. SENIOR MOULD/SEGMENT REPAIRMAN
Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 2
Salary : US$ 3158 3355 / month
The desired candidate must have a minimum of 5 years
experience in the following:
1.
Experience of
assembly/repairs of mechanical equipment
2.
Working in a
Continuous Casting Plant
3.
Experience of ladle
slidegate mechanism maintenance
4.
Experience of tubular
casting mould assembling, Experience of plate
casting mould assembling
Diploma/degree in science is a must.
Scheduled Deployment Date: October 2010
127. CHEMICAL LABORATORY SUPERVISOR
Department : Technical Services
Job Location : Abu Dhabi
No. Of Vacancy : 1
Salary : US$ 3570 4326 / month
The desired candidate must have a minimum of 8 years
experience in the following:
1.
Monitor daily
activities of Chemical and Spectro lab and provide
support in quality control of DR plant and SMP
2.
Arrange and order
required consumable Spaces for smooth operation of
laboratories
3.
Arrange staff in
groups to man the laboratories for 24 hrs to serve
DRP and SMP requirements & ensure timely reporting
of results
4.
Maintain equipment in
working condition to make available 24 hrs ensure
timely reporting of results to DRP and SMP to
control the quality
5.
Develop and update ISO
documents to comply with the company policy
6.
Record and report
problems faced, break down or damages, spares and,
consumables required to his superior to ensure
smooth functioning of testing activities
Also, a degree in Science is a must.
128. DRP LABORATORY ASSISTANT
Department : Technical Services
Job Location : Abu Dhabi
No. Of Vacancy : 1
Salary : US$ 1758 1983 / month
The desired candidate must have a minimum of 3 years
experience in the following:
1.
Receive and prepare
samples from DRP production every 2 hours (during
start up every hour) to control the Quality in DRP
2.
Prepare samples from
oxide charge, DRI charge to furnace, lime
deliveries, Ferro alloys, carbon injection,
refractorys, slag etc for chemical analysis by
chemists
3.
Carry out screen test
on DRI, oxide and raw materials to check compliance
to ESI specification
4.
Carry out tumble test,
bulk density, moisture, compression test and screen
test on each oxide shipments to check the compliance
with ESI specification
5.
Carryout daily
cleaning and maintenance on jaw crushers, ball mill,
screen shaker etc to ensure the availability of
machines 24 x 7 for DRP
6.
Record and report
problems faced, break down or damages, spares &
consumables required to his superior to ensure
smooth functioning of sample preparation machines
Also, undergraduate or diploma in chemistry or
chemical engineering is a must.
129. MECH & METALLURGICAL TESTING LAB SUPERVISOR
Department : Technical Services
Job Location : Abu Dhabi
No. Of Vacancy : 1
Salary : US$ 3570 - 4326 / month
The desired candidate must have a minimum of 8 years
experience in the following:
1.
Monitor daily
activities of mechanical / Metallurgical testing
laboratories
2.
Arrange staff in
groups to man the laboratories for 24 hrs to serve
Rolling Mills
3.
Maintain equipment in
working condition to make available 24 hrs ensure
timely reporting of results to Rolling Mills
4.
Arrange and order
required consumable Spaces for smooth operation of
laboratories
5.
Record and report
problems faced, break down or damages, spares and,
consumables required to his superior to ensure
smooth functioning of testing activities
6.
Develop and update ISO
documents to comply with the company policy
Also, undergraduate or diploma in chemistry or
chemical engineering is a must.
130. MECH & METALLURGICAL TESTING LAB TECHNICIAN
Department : Technical Services
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 3355 / month
The desired candidate must have a minimum of 5 years
experience in the following:
1.
Perform and record
tests on production samples from each cast to ensure
compliance to the related specification
2.
Monitor and inform any
surface abnormalities, yield and tensile values on
the samples to mill and QC inspector to ensure
follow up and corrective action
3.
Store each cast
mechanical test results in Sap to enable printing of
test certificates to customers
4.
Carry out non routine
tests for samples from mills, QC. To enable
inspector to make decision on held bundles
5.
Preserve the samples
in case of any lap opening in bend test, bad steel
and similar problems for inspection by Dept. Manager
to take corrective measures
6.
Carryout routine
Maintenance on testing and measuring equipment
7.
Record and report
problems faced, break down or damages, spares and
consumables required to his superior to ensure
smooth functioning of testing activities
Also, undergraduate or diploma in chemistry or
chemical engineering is a must.
